Pages

Friday, December 14, 2012

proof of concept... gns3 and breakout...

all the elements are together, and it's working...

the 3750 is truly invisible with the tunneling... kind of a shame for such a nice switch, but in the end i probably saved 2 grand between a gns3 server and quad nic's...

a lot of work and a lot to keep straight... layer 3 is working fine... and i haven't seen any mtu inspired errors in ospf yet, having upped the system mtu's where needed...

damn... of course this is on the list:

 http://blog.ipexpert.com/2011/02/28/gns3-and-physical-switches-breakout-switch/#more-6136

using ubu 12.04 and it doesn't really dig all the network screwing around... i lost my wireless connection for a few hours...

core1#sh cdp neigh                                                             
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge        
                  S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone,     
                  D - Remote, C - CVTA, M - Two-port Mac Relay                 
                                                                               
Device ID        Local Intrfce     Holdtme    Capability  Platform  Port ID    
agg1.ozlan       Fas 0/1           160             R S I  WS-C3560- Fas 0/1    
agg1.ozlan       Fas 0/2           160             R S I  WS-C3560- Fas 0/2    
agg2.ozlan       Fas 0/5           176             R S I  WS-C3560- Fas 0/5    
agg2.ozlan       Fas 0/6           176             R S I  WS-C3560- Fas 0/6    
gns3rtr1.ozlan   Fas 0/24          179               R    7206VXR   Fas 0/0    
gns3rtr3.ozlan   Fas 0/23          163               R    7206VXR   Fas 0/0 

gns3rtr3#sh ip route ospf

Gateway of last resort is not set

      1.0.0.0/32 is subnetted, 1 subnets
O        1.0.0.1 [110/2] via 10.30.1.1, 00:02:45, FastEthernet0/0
      2.0.0.0/32 is subnetted, 1 subnets
O        2.0.0.2 [110/3] via 10.30.1.1, 00:02:45, FastEthernet0/0
      3.0.0.0/32 is subnetted, 1 subnets
O        3.0.0.3 [110/3] via 10.30.1.1, 00:02:45, FastEthernet0/0
      4.0.0.0/24 is subnetted, 1 subnets
O        4.0.0.0 [110/3] via 10.30.1.1, 00:02:45, FastEthernet0/0
      10.0.0.0/8 is variably subnetted, 5 subnets, 2 masks
O        10.1.10.0/24 [110/2] via 10.30.1.1, 00:02:45, FastEthernet0/0
O        10.1.100.0/24 [110/2] via 10.30.1.1, 00:02:45, FastEthernet0/0
O        10.1.200.0/24 [110/2] via 10.30.1.1, 00:02:45, FastEthernet0/0
      172.16.0.0/24 is subnetted, 1 subnets
O        172.16.1.0 [110/2] via 10.30.1.1, 00:02:45, FastEthernet0/0
gns3rtr3#

gns3rtr1#ping 10.30.1.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.30.1.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 16/19/20 ms

gns3rtr3#ping 10.1.10.112
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.1.10.112, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 8/11/12 ms

i'm going to build the 3 tshoot topologies also... once i get comfortable with it, i'll post a step by step...

quick tip... sudo /etc/init.d/networking restart has been deprecated... the new command is sudo service networking restart...  that's a command you'll use often...

No comments:

Post a Comment