network cisco ccna gns3 certification arteq

network cisco ccna gns3 certification arteq
a network runs through it

Search insearchofthecert

Sunday, November 4, 2012

ospf area range v. summary address...


area range

To consolidate and summarize routes at an area boundary, use the area range command in router configuration mode.
The area range command is used only with area border routers (ABRs). It is used to consolidate or summarize routes for an area. The result is that a single summary route is advertised to other areas by the ABR. Routing information is condensed at area boundaries. External to the area, a single route is advertised for each address range. This behavior is called route summarization

summary-address (OSPF)

Routes learned from other routing protocols can be summarized. The metric used to advertise the summary is the smallest metric of all the more specific routes. This command helps reduce the size of the routing table.
Using this command for OSPF causes an OSPF autonomous system boundary router (ASBR) to advertise one external route as an aggregate for all redistributed routes that are covered by the address. For OSPF, this command summarizes only routes from other routing protocols that are being redistributed into OSPF. Use the area range command for route summarization between OSPF areas.

No comments:

Post a Comment