network cisco ccna gns3 certification arteq

network cisco ccna gns3 certification arteq
a network runs through it

Search insearchofthecert

Tuesday, November 13, 2012

slimed ospf lab...

from here...

looks challenging... this was not easy to convert...

it has lots of pretty colors... this is the task list:

Plan, design, and implement the International Travel Agency (ITA) network
shown in the diagram and described below. Verify that all configurations are
operational and functioning according to the guidelines.

The ITA needs its core network set up for OSPF with the following
specifications. Use the addressing scheme shown in the diagram.

• Configure the OSPF backbone area on the Ethernet connection between R1
and R5.
• Configure the Frame Relay subnet as a point-to-multipoint network in area
• Configure R2’s loopback interfaces to be in area 200. Summarize this area
with the most efficient summary.
• Configure the Ethernet connection between R3 and R4 to be in area 300.
• Add the loopback on R3 to area 300.
• Make area 300 a totally NSSA area.

• Redistribute the loopback networks on R4 that do not belong in any OSPF
• Create virtual links as necessary for full connectivity.
• Make sure that all loopback interfaces get advertised with the correct subnet

No comments:

Post a Comment