again with the v6l3...

this is what i got...

R1#sh ipv6 route
IPv6 Routing Table - default - 8 entries

OE1 2002::1:3/128 [110/212]
     via FE80::C802:3FFF:FE9D:8, Serial1/0
OI  2026::1:0/122 [110/192]
     via FE80::C802:3FFF:FE9D:8, Serial1/0
OE1 2026::2:0/122 [110/212]
     via FE80::C802:3FFF:FE9D:8, Serial1/0
OE1 2026::3:0/122 [110/212]
     via FE80::C802:3FFF:FE9D:8, Serial1/0
C   2026::12:0/122 [0/0]
     via Serial1/0, directly connected
L   2026::12:1/128 [0/0]
     via Serial1/0, receive
OI  2026::34:0/122 [110/1128]
     via FE80::C802:3FFF:FE9D:8, Serial1/0
L   FF00::/8 [0/0]
     via Null0, receive
R1#ping 2026::3:2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2026::3:2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 40/56/64 ms

looks pretty good to me...