here is an mplsvpn that i built over the summer combined with the switched network...for a look back on building the mplsvpn go here:
http://insearchofthecert.blogspot.com/2012/09/mpls-vpn-again-cont.html
it's exciting for about 11 seconds...
als2#trace 10.1.1.1
Type escape sequence to abort.
Tracing the route to 10.1.1.1
1 10.1.10.99 4 msec 4 msec 4 msec
2 192.168.2.1 8 msec 8 msec 8 msec
3 11.1.3.2 20 msec 20 msec 20 msec
4 11.1.1.1 20 msec 16 msec 16 msec
5 172.16.1.2 20 msec 20 msec *
als2#
als2#ping
Protocol [ip]:
Target IP address: 10.1.1.1
Repeat count [5]: 2
Datagram size [100]:
Timeout in seconds [2]:
Extended commands [n]: y
Source address or interface: 10.1.10.112
Type of service [0]:
Set DF bit in IP header? [no]:
Validate reply data? [no]:
Data pattern [0xABCD]:
Loose, Strict, Record, Timestamp, Verbose[none]: record
Number of hops [ 9 ]:
Loose, Strict, Record, Timestamp, Verbose[RV]:
Sweep range of sizes [n]:
Type escape sequence to abort.
Sending 2, 100-byte ICMP Echos to 10.1.1.1, timeout is 2 seconds:
Packet has IP options: Total option bytes= 39, padded length=40
Reply to request 0 (32 ms). Received packet has options
Total option bytes= 40, padded length=40
Record route:
(10.1.10.112)
(192.168.2.2)
(11.1.4.1)
(11.1.2.2)
(172.16.1.1)
(172.16.1.2)
(172.16.1.2)
(11.1.2.1)
(11.1.4.2)
<*>
End of list
Reply to request 1 (20 ms). Received packet has options
Total option bytes= 40, padded length=40
Record route:
(10.1.10.112)
(192.168.2.2)
(11.1.3.1)
(11.1.1.2)
(172.16.1.1)
(172.16.1.2)
(172.16.1.2)
(11.1.1.1)
(11.1.3.2)
<*>
End of list
Success rate is 100 percent (2/2), round-trip min/avg/max = 20/26/32 ms
als2#
here is a notebook win 7 client that the voice router (hardware router) assigned a dhcp address to... i enabled http on the gns3 router cea1 to verify 80 access...
voicerouter#sh ip dhcp binding
Bindings from all pools not associated with VRF:
IP address Client-ID/ Lease expiration Type
Hardware address/
User name
10.1.200.106 01e8.9a8f.98a7.03 Jul 31 2012 05:21 AM Automatc
and with the 8 routers on gns3, connected to the enterprise, my linux box looks like this...
and the 3750 for real qinq is on the way...
No comments:
Post a Comment