Pages

network cisco ccna gns3 certification arteq

network cisco ccna gns3 certification arteq
a network runs through it

Search insearchofthecert

Friday, January 4, 2013

ripng tshoot...

it's been a hell of a ride... i'll post more configuration later...

R4#sh ipv6 route | ex Codes
IPv6 Routing Table - default - 6 entries
     

R   2002::1:3/128 [120/2]
     via FE80::216:47FF:FE9E:4546, FastEthernet0/0
R   2002::1:4/128 [120/3]
     via FE80::216:47FF:FE9E:4546, FastEthernet0/0
C   2026::2:0/122 [0/0]
     via FastEthernet0/0, directly connected
L   2026::2:1/128 [0/0]
     via FastEthernet0/0, receive
R   2026::3:0/122 [120/2]
     via FE80::216:47FF:FE9E:4546, FastEthernet0/0
L   FF00::/8 [0/0]
     via Null0, receive

R4#ping 2026::3:2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2026::3:2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 8/9/16 ms


that side is done...

tunnel is up...

ospfv3 and ripng plus redist...

and there you have it:

dsw2#sh ipv6 route                                                             
IPv6 Routing Table - Default - 9 entries                                       
                      
R   2002::1:3/128 [120/2]                                                      
     via FE80::216:47FF:FE9E:4547, Port-channel3                               
LC  2002::1:4/128 [0/0]                                                        
     via Loopback0, receive                                                    
R   2026::1:0/122 [120/7]                                                      
     via FE80::216:47FF:FE9E:4547, Port-channel3                               
R   2026::2:0/122 [120/2]                                                      
     via FE80::216:47FF:FE9E:4547, Port-channel3                               
C   2026::3:0/122 [0/0]                                                        
     via Port-channel3, directly connected                                     
L   2026::3:2/128 [0/0]                                                        
     via Port-channel3, receive                                                
R   2026::12:0/122 [120/7]                                                     
     via FE80::216:47FF:FE9E:4547, Port-channel3                               
R   2026::34:0/122 [120/7]                                                     
     via FE80::216:47FF:FE9E:4547, Port-channel3                               
L   FF00::/8 [0/0]                                                             
     via Null0, receive                     


wow... i'm sure i have a lot of clean up to do...

No comments:

Post a Comment