switch blueprint 006

Configure Access Ports for the VLAN based solution


als1#config t
Enter configuration commands, one per line.  End with CNTL/Z.
als1(config)#vlan 101
als1(config-vlan)#int range f0/17 -20
als1(config-if-range)#sw mode access
als1(config-if-range)#sw access vlan 101
als1(config-if-range)#end
als1#sh vlan brie

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/1, Fa0/2, Fa0/3, Fa0/4
                                                Fa0/5, Fa0/6, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24
101  VLAN0101                         active    Fa0/17, Fa0/18, F