this is coming together... l3 port channel between the dsw's... dsw's p2p to r3 (ospf area 0, i don't have an r4 yet)... dsw1 connects via trunk to asw1 vlan 10 for client 1 access throughout... dsw2 connects via trunk to vlan 20... r1 at the top pings through to client 1 on the far left...
r1#ping 10.2.1.10
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.2.1.10, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/5/8 ms
r1#
i have yet to setup the redundant trunks between the access vlans (the x in the diagram) and each dsw... and hsrp for the svi's is soon...
still a lot of work... dhcp, mgmt vlan, nat, router 4, and get the phones back in... damn...
No comments:
Post a Comment